SCUDERIA GIALLO

Will delete from list as sold or add as "stuff" is identified & pictured. Lots of things to clean out. Many of the fabricated parts are the last available!

105/115 Aluminum castor bushings only LSD for 101/105 type. 4 disk set up LSD. Inc. axles, for late 1600/1750 rear ends. Fits smaller type ring & pinions. only one 119 Milano/GTV6 Dropped Spindles (dropped .75 inch) Steering arm modified for more Ackerman & bump steer.

Adjustable Cam sprockets for 6 cylinder, 12V 2.5 & 3.0 motors. A must for shaved heads or for proper cam timing with performance cams (have 2). New! Set of RJR 1004/82 V6 12V HP Street Race cams. These cams have lobe separation for great torque from 2500 to 7000.
Intake Exhaust
Lift Duration. Duration (at valve)

RJR CUSTOM FABRICATED 5.5 inch FLYWHEEL & CLUTCH FOR RACE APPLICATION ONLY

FOR 116 Transaxle cars:
This is the ultimate flywheel & clutch application for 116 Transaxle race cars. The complete assembly including flywheel, clutch cover and clutch disk (Tilton triple disk) weigh under 10 pounds.
A triple Tilton with 3 new disk, custom 6.5 inch flywheel, matched to input shaft, and all related parts. Will sell with all needed components for conversion, includes Alfetta Slave cylinder, Release bearing, Alfetta clutch cover, Release arm. Designed to fit all transaxle (4 or 6 Cylinder cars). Clutch is rated at 800 lb ft Torque capacity.

For 1300/1600:
I have one flywheel with adaptor & AP Twin plate clutch assembly. With 105 tooth ring gear. Assembly weighs less than 16 pounds. Clutch is rated at 400 LB ft Torque.

For 2000cc (2 Liter)

Flywheel with Tilton OT II Twin Disk 7.25 clutch assembly. With ring gear total weight 20 lbs.

--------------------------------

I have a few sets of dropped spindles left from racing activity listed below. I will remove as sold.
116 Type Milano/GTV6 (larger dia. spindle) dropped .75 inch.
115 Type (late) dropped 1.00 inches.
(3) pair of aluminum caster bushings for 105/115 type upper arms
Pair of race prepared & ported V612V 3 Liter Heads Built from 164"L” heads
2 Liter Race ported Head with RJR cams installed